Pulley Lagging

Rough Top Lagging

Lagging Adhesive

Self Adhesive Pulley Lagging

Pulley Traction Pads

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ROUGH TOP LAGGING

Cut to width and shipped in rolls or cut to specific length.  Strips are wound around pulley and held in place by adhesive or by rivets.

WIDTH * PRODUCT
CODE
2" 45402
3" 45403
4" 45404

* Other widths available upon request.

DRIVE RIVETS for attaching lagging to pulley.

PRODUCT CODE 45500

LAGGING ADHESIVE

        RUBATEX - RUBBER CEMENT

        A fast-setting, solvent type, synthetic rubber compound designed for industrial bonding operations on high speed production schedules. Bonding is accomplished by instantaneous pressure alone; no clamps, presses, or complicated heat curing schedules are needed.  Suitable for most types of dissimilar lamination involving plywood, plastic laminates, steel, aluminum, linoleum, pressed wood, copper, porcelanized steel, fiberboard, leather fabric and rubber.  Produces an odorless, non-staining bond which is resistant to heat, moisture, oil, grease, and many    chemicals.  The film is firm and tenacious, featuring high dead-load strength, yet sufficiently elastic to resist shock and fatigue.

   
PINTS:
PRODUCT CODE 31505
QUARTS
PRODUCT CODE 31506
GALLONS:
PRODUCT CODE 31507

         

SELF ADHESIVE PULLEY LAGGING

For light duty applications.  Rough surface lagging with adhesive back.
Supplied on 60 ft. rolls ONLY.

WIDTH* LENGTH PRODUCT CODE
2" 60" 27101

* Other widths available upon request.

PULLEY TRACTION PADS

bullet5.gif (5701 bytes) RANDOM SPLICE LAYOUT

bullet5.gif (5701 bytes) HOW TO ORDER

Easy to install - no bolts, screws or adhesives.  Simply weld a          Just specify, pulley diameter and "Style 5."  You
retainer strip, lay in a pad, weld in another strip, lay in another will receive equal footage of "double" retainers 
pad, etc. until job is finished.  Installation takes but a few hours. and 1/4 footage of "single" retainers .
**Replacement can be done in minutes - simply by sliding the free with each order
pads in or out from the ends of the pulley - without removing Shipping Wt. approx. 17 lbs.
the pulley from the conveyor.

USE THIS TABLE TO DETERMINE NUMBER OF 6 FOOT LENGTHS REQUIRED FOR ONE PULLEY

PRODUCT
CODE
PULLEY
DIA.
PULLEY FACE WIDTH
12" 14" 16" 18" 20" 22" 24" 26" 30" 32" 36" 38" 40" 44" 46" 51" 54" 60" 66" 72"
00470 6" 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3
00471 8" 1 1 1 1 2 2 2 2 2 2 2 3 3 3 3 3 3 4 4 4
00472 10" 1 1 2 2 2 2 2 2 3 3 3 3 3 4 4 4 4 5 5 5
00473 12" 1 2 2 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 6 6
00474 14" 2 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 6 6 7 7
00475 16" 2 2 2 2 3 3 3 3 4 4 4 5 5 5 6 6 6 7 8 8
00476 18" 2 2 2 3 3 3 3 4 4 4 5 5 5 6 6 7 7 8 9 9
00477 20" 2 2 3 3 3 4 4 4 5 5 5 6 6 7 7 8 8 9 10 10
00478 24" 2 3 3 3 4 4 4 5 5 6 6 7 7 8 8 9 9 10 11 12
----- 28" 3 3 4 4 4 5 5 6 6 7 7 8 8 9 9 10 11 12 13 14
00479 30" 3 3 4 4 5 5 5 6 7 7 8 8 9 10 10 11 12 13 14 15
00480 36" 3 4 4 5 5 6 6 7 8 8 9 10 10 11 12 13 14 15 17 18
00481 42" 4 5 5 6 6 7 7 8 9 10 11 12 12 13 14 15 16 18 20 21
00482 48" 4 5 6 6 7 8 8 9 10 11 12 13 14 15 16 17 18 20 22 24
----- 54" 5 6 6 7 8 9 9 10 12 12 14 15 15 16 18 20 21 23 25 27
----- 60" 5 6 7 8 9 10 10 11 13 14 15 16 17 19 20 22 23 25 28 30
----- 72" 6 7 8 9 10 11 12 13 15 16 18 19 20 22 23 26 27 30 33 36