Citri Pol®

White Food Belt 

A standard in the food processing and pharmaceutical industries. Smooth, oil resistant 3/64" top cover is non-toxic, non-contaminating, tasteless and odorless and meets U.S. Food and Drug Administration requirements.

Friction surface bottom.

Used extensively in bakeries, canneries, meat, poultry, and pharmaceutical plants.

Performs extremely well in chlorinated wash environment.

Fresh fruit and vegetable wax application will not leave odorous affect on cover. Temperature range 0˚F to + 250˚ F

RMV White Food Belt
 

High release, high gloss, satin finish cover reduces bacterial count - easily cleaned - less staining.

Provides superior tracking and reduces edge wear.

Outstanding performance in bakeries, canneries and processing plants - citrus fruits, vegetables, meats, and pharmaceuticals. Performs extremely well in chlorinated wash environment.

Fresh fruits and vegetable wax application will not leave odorous affect on cover.

Temperature range -16˚F + 180˚F.

RAMV Tan Food Belt

High release, high gloss covers reduce bacterial count and is less staining and easily cleaned. Provides superior tracking and reduces edge wear. Outstanding performance in bakeries, canneries and processing plants, citrus fruits, vegetables, meats and pharmaceuticals. Performs extremely well in chlorinated wash environment. Fresh fruit and vegetable wax application will not leave odorous affect on cover.

Temperature range -16˚ + 180˚ F.

Citri Pac®

32oz  Transmission Belt

CITRI-PAC belting is a general purpose belt suitable for most power drive and conveyor service.

An economical belt for moderate speeds and larger diameter pulleys, in service where oil resistance is not required. This belt is constructed with friction surface both sides. 
This 32 oz. duck is impregnated with a rubber skim coat between all plies. Has 16-19 lbs. friction between plies with square cut, treated edges only.

High Speed

35oz Transmission Belt

35 OZ. TRANSMISSION BELT is for heavy industrial drive applications where it is subjected to severe stress and shock. It is frequently used for elevator belting, where there are little or no moisture problems. It is built for long life at high speeds over small diameter pulleys with a minimum of stretch.

Constructed with friction surfaces both sides, 35 oz. hard silver duck impregnated skim coat between all plies. Has 20-24 lbs. friction between plies with square cut, treated edges only.

All synthetic carcass combined with 2500 to 3000 tensile cover stock.

Available as listed below in 160, 220, 330, and 440 pound carcass.

160 2-ply

220 2-PLY

330 3-PLY

440 4-PLY

Hot Material 400 Degrees

A belt featuring specially developed high temp compounds.

Ideal for withstanding the baking and cracking actions of hot fine materials.  Recommended in situations where extreme heat (up to 400˚F) is encountered.  For belt conveyor or bucket elevator services. 220 pound belt.

MOR Multi Chevron

Chevron Top White

Unique surface pattern offers high incline conveying ability - even for large freely flowing products.

Ideal for soybeans, Lima beans, green beans, larger grains, and particularly wood chips.

Incorporates new superior oil resistant formulation which increases belt life substantially and gives exceedingly high resistance to the effects of fats, oils and powdered materials.

Super Grip Green Ruff Top

For use on incline conveyors. Carcass is 100% Polyester which guarantees low stretch (approx 1% at rated tension). Super oil and chemical resistant - No trouble even from oils, water, ozone, or most chemicals.

Combines all the features of single ply belting with the functional properties of fabric impression traction surface, 30˚ incline and declines (depending on material, of course).

Carboxylated

Nitrile Blue Rough Top

Exceptional abrasion resistance - will outwear traditional premium rough top products by a factor 3 to 1.

Carboxylated nitrile rough top belts are 3 ply polyester particularly well suited for use in the paper and cardboard box industries, citrus plants, food and beverage applications where superior abrasion resistance and long life make them the most cost effective solution to material needs.

Poly-Lift  Ruff Tops

The ideal belt for use on inclined conveyors in package conveying. Its cover has been designed specifically to prevent lateral and lengthwise slippage. This special cover stock measures a minimum of 3/32" from the peaks of

the molded face to the fabric or carcass.

Available in widths up to 72".

Super Steep

"Super Steep" is constructed with tan non-marking

gum surface with 3 ply cotton/polyester fabric carcass.

The "Super Steep" cover allows packaged

products to be transported up or down

steep grades to a maximum of 45˚.

Diamond Top

An exclusive 45˚ incline belt designed to handle hard, soft, smooth or rough surface packages, boxes or cartons, where exceptional gripping is required.

Stocked in widths to 72"

Tan cover - all synthetic 2 ply polyester carcass x bareback.